Laden...
Laden...
| Model | 6632+ Series |
| Output Current | 20A – 640A (per system) |
| Max. Frequency | 100Hz – 30MHz (per model) |
| Power Consumption | 320W / 640W |
| Software | PC Link (optional) |
| 6632+6210 | 6632+6220 | 6632+6223 | 6632+6225 | 6632+6240 | 6632+6243 | 6632+6243H | |
|---|---|---|---|---|---|---|---|
| Frequency Response | 100Hz-3MHz | 100Hz-3MHz | 100Hz-10MHz | 100Hz-30MHz | 100Hz-3MHz | 100Hz-10MHz | 100Hz-10MHz |
| Output Current Max. | 60A | 120A | 120A | 20A | 320A | 320A | 640A |
| Power Consumption | 320W | 320W | 320W | 320W | 640W | 640W | 640W |
| DC Bias Units | 6 | 6 | 6 | 1 | 8 | 8 | 16 |
| Output Current per Unit | 10A | 20A | 20A | 20A | 40A | 40A | 40A |
| Current Accuracy | 0-1A: 1%+5mA · 1-5A: 2% · 5-40A: 3% |
| DCR Test | ● |
| Constant Power Output | ● |
| Current Switch | ● (not supported on 6632+6225) |
| Graphic Scanning Analysis | Frequency sweep, magnetic saturation curve (Isat), rated current curve (Irms) |
| 6632-1/-1S | 6632-3/-3S | 6632-5/-5S | 6632-10/-10S | 6632-20/-20S | 6632-30/-30S | 6632-50/-50S | |
|---|---|---|---|---|---|---|---|
| Test Frequency | 10Hz-1MHz | 10Hz-3MHz | 10Hz-5MHz | 10Hz-10MHz | 10Hz-20MHz | 10Hz-30MHz | 10Hz-50MHz |
| Equivalent Circuit Analysis | 6632S |
| Frequency Setting | Continuous |
| Frequency Output Accuracy | ±0.01% |
| Frequency Resolution | 100mHz, 6-digit frequency input |
| Basic Accuracy | ±0.08% (typical ±0.05%) |
| AC Drive Level (Voltage) | 10mV-2Vrms (100Ω), 10mV-1Vrms (25Ω) · resolution 1mV · accuracy ALC ON 6%±2mV / OFF 10%±2mV |
| AC Drive Level (Current) | 200µA-20mArms · resolution 10µA · accuracy ALC ON 6%±20µA / OFF 10%±20µA |
| DC Drive Level | 1V (fixed) |
| Output Impedance | 25Ω / 100Ω (switchable) |
| DC Bias Voltage | Built-in ±12V (100Hz-50MHz) · external ±12V/±40V/±2000V |
| DC Bias Current | Optional DC bias current source (20A/60A/120A/320A) · external 100mA/1A |
| Measurement Mode | Meter mode, list mode, sweep mode; optional equivalent circuit analysis (S models) |
| Measurement Parameters | |Z|, |Y|, θ, X, R, G, B, L, D, Q, DCR, C, ESR, ε, µr |
| Test Time (fastest) | < 3ms |
| |Z| | 0.000mΩ – 9999.99MΩ |
| R, X | ±0.000mΩ – 9999.99MΩ |
| |Y| | 0.00000µS – 999.999kS |
| G, B | ±0.00000µS – 999.999kS |
| θ (RAD) | ±0.00000 – 3.14159 |
| θ (DEG) | ±0.000° – 180.000° |
| Cs, Cp | ±0.00000pF – 9999.99F |
| Ls, Lp | ±0.00nH – 9999.99kH |
| D | 0.00000 – 9999.99 |
| Q | 0.00 – 9999.99 |
| Δ | ±0.00% – 9999.99% |
| Rdc | 0.00mΩ – 99.9999MΩ |
| εr', εr'' | 0 – 100000 |
| µr', µr'' | 0 – 100000 |
| DC Bias Current Source | Impedance Analyzer | |
|---|---|---|
| Dimensions (W×H×D) | 337-356 × 145-147 × 497-644 mm (per model) | 336×147×340 mm |
| Weight | 15-20 kg (per model) | 3.95 kg |
| Display | - | 7" TFT (800×480), Farbe |
| Measurement Circuit | Series / Parallel |
| Correction | Open circuit / short circuit / load correction |
| Cable Compensation | 0 / 0.5 / 1 / 2 m |
| BIN | ABS, ΔABS, Δ%, OFF |
| Comparator | 9 |
| List Mode | 50 groups of multi-step settings (up to 15 steps each) |
| Built-in Storage | 100 LCR setting documents, 50 list mode settings |
| USB Host Storage | LCR settings, list mode settings, BMP graphics, sweep screens and test data |
| Trigger | Auto, manual, RS-232, GPIB, Handler |
| Power Supply | 88-264Vac, 47-63Hz |
| Power Consumption (Analyzer) | 30VA |
| Environment | 10-40°C, 20-90% RH |
| Interface | RS-232, Handler |
