Laden...
Laden...
| Max. Frequency | 1MHz |
| AC Drive Level | 10mV - 2Vrms |
| Output Impedance | 25Ω, 100Ω |
| Software | optional |
| Frequency range | DC, 0.2Hz to 100kHz |
| Basic accuracy | ±0.05% |
| Sampling Rate | 500 kSPS |
| Rated Voltage | 800 V (CF3: 15/30/60/150/300/600V; CF6: 7.5/15/30/75/150/300V) |
| Rated Current | 30 A (direct input) |
| Current Range Direct | 5 mA to 30 A (CF3); 2.5 mA to 10 A (CF6) |
| Current Range External | 500 mV / 1V / 2V / 5V / 10V (external current sensor input, CF3) |
| Continuous Max Voltage | Peak 1131 V |
| Harmonic Analysis | 100th order, PLL synchronization with DFT, PLL source 20Hz to 480Hz, DFT length 4096 |
| Input Impedance Voltage | Input resistance approx. 1.66 MΩ; input capacitance approx. 13 pF |
| Line Filter | OFF or ON (500Hz / 5kHz / 100kHz) |
| Frequency Filter | OFF or ON (500Hz) |
| Ad Converter | 16-bit, maximum 500 kSPS, simultaneous conversion of voltage and current |
| Integration Range | 0h00m00s to 9999h59m59s; up to 10,000 hours |
| Wiring System | Single-phase, two-wire (1P2W) |
| Measured Parameters | VRMS, VDC, Vmn, VPP, V+PK, V-PK, IRMS, IDC, IPP, I+PK, I-PK, frequency VHZ/IHZ, P/P+PK/P-PK, Crest Factor (CFV/CFI), PF, Wh, MCR, AVI, Ah, S, Q, DEG, DPF, AVP, VTHD/ITHD/PTHD |
| Interfaces | LAN, SIGNAL I/O, USB Device, RS-232, USB Host (standard) |
| Power supply | 100 to 240 Vac, 50 to 60 Hz |
| Power consumption | 30 VA (max) |
| Display | 4.3 inch TFT (800×480) |
| Operating environment | Temperature: 13 to 40 °C, Humidity: <80% RH |
| Dimensions | 214 × 115 × 300 |
| Weight | 2.9 |
